Thermaltake Core P7 Tempered Glass Edition

Thermaltake Core P7 Tempered Glass Edition

Thermaltake Core P7 Tempered Glass Edition

Thermaltake Core P7 Tempered Glass Edition E-ATX Open Frame Panoramic Viewing Tt LCS Certified Gaming Computer Chassis CA-1I2-00F1WN-00
Thermaltake Core P7 Tempered Glass Edition Full Tower Chassis
Thermaltake pushes the limit of wall-mount full tower to launch the Core P7 Tempered Glass Edition full tower chassis, which boasts an enlarged 5mm thick tempered glass window and, as the first ever in the industry, features four extended chassis installation angle options, allowing users to assemble the extended cases at a 45° / 90°/ 180°/ 270° angle to the front /rear side of the main chassis; plus 3-way placement layouts (wall mountable, horizontal laying and vertical standing) and full assembly capacity and expandability for ultimate air/liquid cooling system supporting, the Core P7 TG permits users limitless potential with how they want to configure their systems.

*A standard riser cable is included.


Tt LCS Certified
Tt LCS Certified is a Thermaltake exclusive certification applied to only products that pass the design and hardcore enthusiasts standards that a true LCS chassis should be held to. The Tt LCS certification was created so that we at Thermaltake can designate to all power users which chassis have been tested to be best compatible with extreme liquid cooling configurations to ensure you get the best performance from the best features and fitment.

5mm Thick Tempered Glass Window with Gorgeous View
The Core P7 TG is a true open frame case with viewing capability of showing full front and back sides. The tempered glass panel features 5mm thickness that meets the highest standards in the industry. Moreover, unlike any other cases on the market, the enlarged glass window permits users to fully display every interior component of the system and show off their dedication and skill set.

Ultimate Extended Chassis Assembly Flexibility
The most notable aspect of the Core P7 TG is that, it delivers the ultimate extended chassis assembly flexibility thanks to four installation angle options: users get to install the extended chassis at 45° / 90°/ 180°/ 270° to the front/rear side of the main case. Such high installation flexibility elevates the potential for customization and makes it the kind that people will stare at in envy.

3-Way Placement Layout
The Core P7 TG is designed for use in three different ways: Wall-mount, vertical, and horizontal placement. Built for customization that reflects the makers’ personality, it allows for adjustments to the chassis for the best viewing presentation while ensuring outstanding cooling performance. Users can hang it on the wall as decoration, take it to wherever they want and display the nice builds vertically or horizontally.

DMD - Dismantlable Modular Design
The Core P7 TG open frame chassis enables user to freely build the system from the ground up with given modular panels, racks, brackets, and pre-design mounting arrays. No more unreachable screw corners or gaps and enjoys installation in a breeze with Dismantlable Modular Design.

Versatile GPU & PSU Orientation
Show off your graphic card and power supply with our special design bracket. The Show off your graphic card and power supply with our special design bracket. The Core P7 TG has included a Thermaltake Gaming PCI-E 3.0 X16 Riser Cable for you to choose the way you want to build the system. Further, the Core P7 TG also has the support for vertical PSU layout when ITX motherboard is applied.

Thermaltake TT Premium PCI-E 3.0 Extender (Optional) – Supports a wide range of GPU solutions with ultra-excellent quality. Features like, extreme high-speed cable with highly-routable design, EMI shielding with conducting polymer are crafted for meeting the most demanding system. Available in 300mm, 600mm and 1000mm length.
Remarkable Expansion
Designed for high-end gaming system compatibility, the Core P7 TG main chassis supports motherboard up to standard E-ATX, a tower CPU cooler with maximum height 180mm, and a dual expansion slot VGA of up to 570mm in length without reservoir. Further, the Core P7 TG features a powerful storage expansion solution which, through easy installation, houses up to eight 3.5”/2.5” storage devices; besides, users can remove the drive bays to gain maximum space for cable management up to 45mm.?

3.5” or 2.5” HDD Drive Compatible

Supreme Liquid-Cooling Support
The Core P7 TG has the capability to deliver an excellent cooling efficiency, and enables users to build a complete thermal solution, including DIY/AIO liquid-cooling systems and air-cooling units. Both of the main case and extended case support up to either a 480mm liquid cooling radiator or three 140mm case fans with a long graphic card at the same time. Users can also install an AIO cooler onto the case after mounting the AIO bracket.

Thermaltake Core P7 Tempered Glass Edition

Core P7 TG Radiator Supporting List

Radiator Compatibility List
	120 mm	140 mm	240 mm	280 mm	360 mm	420 mm	480 mm
Main Chassis	*	*	*	*	*	*	*
Extended Chassis	*	*	*	*	*	*	*

Core P7 TG Fan Supporting List

Fan Compatibility List 120 mm 140 mm Main Chassis 4 3 Extended Chassis 4 3

Thermaltake Compatible Fan
	120mm	140mm
Pure Fan Series	*	*
Luna Fan Series	*	*
Odin Fan Series	*

Core P7 TG Wall-Mounting Support
It’s an optional feature that wall-mounting parts are not included. See the picture on the left-hand side or download the Core P7 TG manual under “Support”.




Learn more about the Thermaltake Core P7 Tempered Glass Edition (CA-1I2-00F1WN-00)

ModelBrandThermaltakeSeriesCoreModelCore P7 Tempered Glass Edition (CA-1I2-00F1WN-00)
DetailsTypeATX Full TowerColorBlackCase MaterialSGCCWith Power SupplyNoPower SupplyStandard PS2 PSU (optional)Motherboard CompatibilityMicro ATX / ATX / Mini ITX / E-ATX (12" x 13")Side Panel WindowTempered Glass (570 X 570 x 5mm)
ExpansionExternal 3.5" Drive Bays1 x 3.5" or 2.5" (HDD tay) , 2 x 3.5" or 3 x 2.5" (HDD Bracket)Internal 3.5" Drive Bays3 x 3.5" or 2.5" (Behind the M/B tray)Expansion Slots8
Front Panel PortsFront Ports2 x USB 2.0 / 2 x USB 3.0 / 1 x HD Audio
Cooling System120mm FansMain Chassis: 4 x 120mm , 3 x 140mm
Extended Chassis (Left or Right): 4 x 120mm , 3 x 140mm
Dimensions & WeightMax GPU Length Allowance280mm (With Reservoir), 570mm (Without Reservoir)Max CPU Cooler Height Allowance180 mmDimensions (H x W x D)Main Chassis: 23.90" x 13.10" x 22.40"
Extended Chassis: 23.90" x 13.10" x 12.60"
Assembling Chassis: 24.70" x 13.10" x 53.10"Weight56.21 lbs.
Additional InformationDate First AvailableOctober 10, 2018

Product description
Size:P3 ATX | Color:Black



Bring out the modder within you. The Core P3 Tempered Glass Edition Open Frame chassis sets a new benchmark in groundbreaking open frame chassis design. With full support for liquid cooling and Thermaltake PCI-e X16 Riser Cable included - the Core P3 is built from the ground up to make even the most advanced PC customization and modification effortless and hassle free, making it a dream to build with. The open frame panel design is protected with a clear acrylic panel - behind which sits the chassis frame, with supports the latest PC hardware, AIO and DIY liquid cooling solutions. Specially designed dual GPU and PSU layouts, plus a 3-way stand placement (wall mountable, horizontal laying and vertical standing) allow users to position the chassis any orientation - and appreciate your artwork status worthy build. 3 year warranty.

"Thermaltake's Core P3 wall-mountable chassis takes honors as being the highest rated case we have ever reviewed." - Chad Sebring of Tweaktown

"For computer enthusiasts nothing is better than showing off your hardware and Thermaltake's Core P3 is the perfect chassis for that." - Bob Buskirk of ThinkComputers



The new Core P3 Tempered Glass Edition Open Frame chassis comes with a 5mm thick tempered glass front panel to provide durability and a clear view of the inner components. Core P3 TG supports the latest PC hardware, AIO and DIY liquid cooling solutions. The Chassis is designed with dual GPU and PSU layout options and 3-way stand placements (wall mount, horizontal, and vertical placements) provide users unlimited flexibility when it comes to building the most advanced customized PC.

Model: Core P3 TG

P/N: CA-1G4-00M1WN-06

Case Type: Mid Tower

Dimension (H x W x D): 512 x 333 x 470 mm (20.2 x 13.1 x 18.5 inch)

Net Weight: 11.3 kg / 24.91 lb

Side Panel: 5mm Tempered Glass x 1

Color: Black

Material: SPCC

Expansion Slots: 8

Motherboards: 6.7” x 6.7” (Mini ITX), 9.6” x 9.6” (Micro ATX), 12” x 9.6” (ATX)

I/O Ports: USB 3.0 x 2, USB 2.0 x 2, HD Audio x 1

PSU: Standard PS2 PSU (optional)

Fan Support

Left Side: 3 x 120mm, 3 x 140mm

Radiator Support

Left Side: 1 x 360mm, 1 x 420mm



Clearance

CPU cooler height limitation: 180mm

VGA length limitation: 280mm (With Reservoir & Radiator), 450mm (Without Reservoir & Radiator)

PSU length limitation: 200mm

Thermaltake Core P7 Tempered Glass Edition

amazon affiliate link below